[vc_row][vc_column][vc_row_inner][vc_column_inner width=”1/2″][vc_single_image image=”144″ img_size=”full” alignment=”center” style=”vc_box_outline”][vc_column_text]
Tool pull force check
[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_single_image image=”145″ img_size=”full” alignment=”center” style=”vc_box_outline”][vc_column_text]
Vibration analysis and balancing
[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_separator][vc_row_inner][vc_column_inner width=”1/4″][/vc_column_inner][vc_column_inner width=”1/2″][vc_single_image image=”146″ img_size=”full” alignment=”center” style=”vc_box_outline”][vc_column_text]
Temperature monitor and runout check
[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][/vc_row_inner][vc_separator][vc_column_text]Predictive maintenance is done at customer end to predict the failure before it actually happens. This is done by directly monitoring the below said parameters on the spindles during normal operating condition
- Tool pull force check / Chuck part clamp force check
- Vibration analysis and balancing
- Spindle rigidity check
- Spindle noise and temperature monitor
- Spindle shaft runout/ Taper runout and test bar runout check
- Coolant seepage and stator electrical integrity check
[/vc_column_text][/vc_column][/vc_row]